Product Details Tyfo® WAB Composite
using Tyfo® S Epoxy
DESCRIPTION
The Tyfo® WAB Composite is comprised of Tyfo® S Epoxy and Tyfo® WAB reinforcing fabric. Tyfo®
WAB is a custom 0/90 degree bi-directional weave aramid fabric used in the Tyfo® Fibrwrap®
System. The aramid material is orientated equally in the 0o and 90o direction. The Tyfo® S Epoxy
is a two-component epoxy matrix material.
USE
Tyfo® WAB Fabric is combined with Tyfo® epoxy material for lightweight reinforcement for
masonry, hollow clay tile, brick, CMU block and other surfaces, as a reinforced coating, finish
fabric, and blast protection application for bridges, buildings, and other structures.
ADVANTAGES
• Good high & low temperature properties
• Bi-directional for strength in all directions
• Impact-resistant, tough material
• Long working time
• High elongation
• Ambient cure
• 100% solvent-free
| Property | ASTM Method | Typical Test Value | Design Value* |
|---|---|---|---|
Ultimate tensile strength in |
D-3039
|
71,780 psi (494.9 MPa) (0.35 kip/in. width) |
61,013 psi (420.7 MPa) (0.61 kip/in. width) |
Elongation at break |
D-3039 |
1.7% |
1.7% |
Tensile Modulus, psi |
D-3039 |
4.26 x 106 psi (29.4 GPa) |
3.62 x 106 psi (25 GPa) |
| Ultimate tensile strength 90 degrees to primary fiber, psi |
D-3039 |
71,780 psi (494.9 MPa) (0.35 kip/in. width) |
61,013 psi (420.7 MPa) (0.61 kip/in. width) |
Laminate Thickness |
0.01 in. (0.25 mm) |
0.01 in. (0.25 mm) |
* Design and specification values will vary based on individual project requirements and applicable safety factors. Contact Fyfe Co. LLC engineers to determine appropriate specification values.